Linear Position Sensor ME-7 Series LVIT

The ME-7 Series LVIT (Linear Variable Inductance Transducer) Position Sensors from Alliance Sensors Group has been designed as an alternative to magnetostrictive sensors and has more robust construction and a lower cost of ownership. The unit can be embedded into the end cap of industrial or mobile hydraulic cylinders and pneumatic actuators. These ME-7 Series sensors are based on a proprietary contactless inductive sensing technology that employs a 7 mm diameter probe with a shorter stroke-to-length ratio than most other technologies, and uses a gun drilled hole in the cylinder rod for sensing the rod position rather than requiring a ring magnet assembly.
An ME-7 has a 1.89 inch (48 mm) diameter sensor head with an o-ring and back up ring in a groove, so it can be mounted in the same cavity in the cylinder cap and locked in with radial set screws just like a magnetostrictive sensor. Because they are contactless, ME-7 Series sensors do not wear out and have no output signal deterioration over the life of the sensors, and because it uses an inductive coil, an ME-7 sensor can withstand much greater shock and vibrations than other technologies. A very useful element of the ME-7 sensors is ASG’s proprietary SenSet™ feature whereby a sensor’s analog output can be adjusted in the field after installation to match the range of motion of the cylinder rod.
For more information see the technical data sheet below.

Features

•     LVIT Technology™ (Linear Variable Inductive Transducer)
•     Senses cylinder rod… NO MAGNET REQUIRED
•     Extremely robust construction
•     Easily adapts to existing cylinder designs
•     High resolution with choice of analog I/Os
•     Contactless sensing for long sensor life
•     Proprietary SenSet™ for field adjustable range scaling

Specifications

• Analog I/Os                   :     0 – 5 V or 0.5 – 4.5 V output with 8 – 30 V input, 35 mA max. 0 – 10 V output with 12 – 30 V input, 35 mA max. 4 – 20 mA (3-wire) output with 18 – 30 V input, 60 mA max. (75 C max.)
• Measuring Ranges          :     0-25 mm to 0-600 mm (1 to 24 inches) Full Scale
• Linearity Error               :     ±0.15% of Full Scale Output (FSO) typical, ±0.25% of FSO max.
• Resolution                     :     0.025% of FSO
• Update Rate                  :     300 Hz nominal
• Operating Temperature  :     -20 to 85 C (-40 C to 105 C Extended Range)
• Temperature Coefficient :     ≤±0.015% of FS/deg C

• Operating Pressure        :     5000 psig (350 bar) max operating, 7500 psig (520 bar) proof
• Vibration                       :     5-20 Hz 0.5 inch p-p; 20-2000 Hz 4.2 g p-p

• Shock                           :     1000g, 11 msec
• Terminations                 :     IEC IP-67

• Humidity                       :     95% RH, non-condensing